LED Mini Hand Torch
Rechargeable
HIGH
MEDIUM
LOW
The Lighthouse Mini Torch provides powerful illumination in the palm of your hand. Designed for outdoor adventures, emergency situations, or everyday tasks around the home, this torch combines portability with performance.
With an impressive output of 1000-lumens, the Lighthouse Mini Torch delivers a remarkable beam distance of up to 110 metres. And weighing just 100 grams, it easily fits in your pocket or clips onto your bag, making it incredibly convenient for on-the-go use.
The torch features four versatile light modes; 25%, 50%, 100%, and the high-intensity TURBO mode - allowing you to adjust the brightness to your needs. Powered by a robust 700mAh Li-ion battery, it offers an impressive run time of up to 10.5 hours on a single charge, ensuring you have reliable light whenever you need it.
Turbo mode gives you short bursts of power when you need it most. This will run for 30 seconds and then return to the last used mode to prevent the torch from overheating and protect the battery.
Designed for durability, the aluminium alloy body is built to withstand the rigours of everyday use while providing resistance to knocks and drops. Plus, the handy charge indicator keeps you informed of the battery level, so you’re never caught off guard.
Whether you’re camping under the stars, hiking through the wilderness, or simply need a dependable source of light for your daily activities, the L/HMT1100R Mini Hand Torch is the perfect tool for the job.
Mode | Turbo | High | Med | Low |
---|---|---|---|---|
Brightness | 1000 lm | 500 lm | 250 lm | 25 lm |
Run time | 30s per activation | 2 hr | 4.5 hr | 10.5 hr |
Beam distance | 110 M | |||
Light source | High-performance LED | |||
Water resistant | IPX4 | |||
Impact resistant | 1 metre | |||
Charge time | 1.5hr (approx.) | |||
Weight | 100g | |||
Dimensions | 30 x 30 x 70mm | |||
Supplied with | USB-C charging lead |
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
---|---|---|---|
First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). |
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
---|---|
What are the different IK ratings? | |
IK00 | There is no Protection |
IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |