Beacon LED Site Light
Rechargeable & 240V
10000
LUMENS
USB
RECHARGEABLE
HIGH
MEDIUM
LOW
Beacon LED Site Light
The Lighthouse Beacon Rechargeable LED Site Light is your ultimate lighting solution for any workspace! This powerful work light boasts an impressive 10000-lumen brightness (Mains Powered) and 5000-lumen (Battery) ensuring you have ample illumination for any task. With three adjustable lighting modes, you can easily customise the brightness to suit your needs.
Equipped with a 5200mAh internal battery, the Lighthouse Work Light offers up to 2 hours of continuous run time when working away from mains power or when power is unavailable. Its 6500K colour temperature provides a bright, daylight-like quality, perfect for detailed work.
The sitelight is lightweight and foldable, and it features rotational wing light heads that make it incredibly versatile and fit for any application. Designed to withstand tough conditions, this work light has metal retractable legs, ensuring protection against tough working conditions.
Use as a rechargeable with the benefits of being ‘cable free’ or run continuously using the 2-metre long 240v mains cable provided. This versatile heavy-duty light features both USB-A and USB-C outputs for added convenience. With a charge time of just 3 hours, you will be back to work in no time.
Whether you are working in a garage, on a construction site, or tackling a DIY project at home, the Lighthouse Rechargeable Work Light 10,000 lumen is the perfect companion to light up your workspace.
Features:
• 10000 lumen (mains power) / 5000 lumen (on battery)
• 3 light modes (100%,50%,25%)
• 5200mAh internal battery
• 2 hours run time
• Foldable with storage bag
• Rotational light heads
• 2-metre power cord
• Working height 950mm (Min) – 2300mm (Max)
| Light Modes | 100%, 50%, 25% | ||
| Brightness | 10000 lm (mains power) / 5000 lm (on battery) | ||
| Colour Temperature | 6500k | ||
| Run time | Up to 2 hours | ||
| Charge time | Approx. 3 hours | ||
| Battery | 16V 5200mAh Li-ion Rechargeable | ||
| Working height | 950mm (Min) – 2300mm (Max) | ||
| Cable length | 2M | ||
| Supplied with | Mains cord, Charging cable & Carry bag | ||
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
|---|---|---|---|
| First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
| 0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
| 1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
| 2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
| 3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
| 4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
| 5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
| 6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
| 7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
| 8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
| 9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). | ||
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
|---|---|
| What are the different IK ratings? | |
| IK00 | There is no Protection |
| IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
| IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
| IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
| IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
| IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
| IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
| IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
| IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
| IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
| IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |