LED Work Light
Rechargeable
HIGH
MEDIUM
LOW
The Lighthouse Rechargeable Work Light is a powerful and versatile work light that offers 360-degree illumination for both domestic and professional users.
This powerful work light delivers an impressive rotating LED head that outputs 2000 lumens of brightness, ensuring excellent illumination for any job. It features adjustable light modes at 100%, 50%, and 25% to suit your needs. With its unique folding design, you can easily mount it or use it as a freestanding light. Plus, it has magnets and a hanging hook for added convenience.
Equipped with a 6000mAh internal battery, the Lighthouse Work Light offers up to 8 hours of continuous run time. Its 6500K colour temperature provides a bright, daylight-like quality, perfect for detailed work. The light is also lightweight, foldable, and magnetic and includes a handy hanging hook making it incredibly versatile and fit for any application.
Designed to withstand tough conditions, this work light has an IP44 rating, ensuring protection against dust and water splashes. Charging is a breeze with the included USB-C cable, and the light features both USB-A and USB-C outputs for added convenience. With a charge time of just 4 hours, you will be back to work in no time.
Whether you're working in a garage, on a construction site, or tackling a DIY project at home, the Lighthouse Rechargeable Work Light 2000LM is the perfect companion to light up your workspace.
Product Features:
• 2000-lumen brightness
• 3 Lighting modes (100%,50%,25%)
• 6000mAh internal battery
• 6500k colour temperature
• Up to 8 hours of run time
• Lightweight, foldable, and magnetic
• IP44
• Charging cable included
Mode | 100% | 50% | 25% |
---|---|---|---|
Brightness | 2000 lumens | 1000 lumens | 500 lumens |
Run time | Up to 8 hours | ||
Colout Temperature | 6500k | ||
Batteries | 3.7V 6000mAh Li-ion rechargeable battery | ||
Run time | UP to 8 hours | ||
Charge time | Approx. 4 hours | ||
Water resistant | IP44 | ||
Weight | 720g | ||
Dimensions | 179 x 46 x 225mm | ||
Supplied with | USB-C charging cable |
IP RATINGSThe IP (Ingress Protection) code indicates how well a device is protected against water and dust. This is defined by the international standard EN 60529. |
|||
---|---|---|---|
First Digit Solids (intrusion protection) |
Second Digit Water (moisture protection) |
||
0 | (or X - see section below): No special protection. Not rated (or no rating supplied) for protection against ingress of this type. | 0 | (or X - see section below): No protection. |
1 | Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter. | 1 | Protection against vertically falling droplets, such as condensation. ensuring that no damage or interrupted functioning of components will be incurred when an item is upright. |
2 | Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact). | 2 | Protection against water droplets deflected up to 15° from vertical |
3 | Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more. | 3 | Protected against spray up to 60° from vertical. |
4 | Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc). | 4 | Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects). |
5 | Partial protection against dust that may harm equipment. | 5 | Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects). |
6 | Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow. | 6 | Protection against direct high pressure jets. |
7 | Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 metre (limited ingress permitted with no harmful effects). | ||
8 | Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type. | ||
9K | Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection). |
IK RATINGSIK ratings are defined as IK and a number from 00 to 10, this indicates the degree of protection provided by the electrical enclosures against external mechanical impacts. |
|
---|---|
What are the different IK ratings? | |
IK00 | There is no Protection |
IK01 | Protected against 0.14 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 56mm above) |
IK02 | Protected against 0.2 joules of impact (this is the equivalent to the impact of a 0.25kg mass dropped from 80mm above) |
IK03 | Protected against 0.35 joules of impact (this is the equivalent to the impact of a 0.2kg mass dropped from 140mm above) |
IK04 | Protected against 0.5 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 200mm above the impacted surface) |
IK05 | Protected against 0.7 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 280mm above the impacted surface) |
IK06 | Protected against 1 joules of impact (the equivalent to the impact of a 0.25kg mass dropped from 400mm above the impacted surface) |
IK07 | Protected against 2 joules of impact (the equivalent to the impact of a 0.5kg mass dropped from 400mm above the impacted surface) |
IK08 | Protected against 5 joules of impact (the equivalent to the impact of a 1.7kg mass dropped from 300mm above the impacted surface) |
IK09 | Protected against 10 joules of impact (the equivalent to the impact of a 5kg mass dropped from 200mm above the impacted surface) |
IK10 | Protected against 20 joules of impact (the equivalent to the impact of a 5kg mass dropped from 400mm above the impacted surface) |